Get a quote – Fill in the form below

[one_half]

[/one_half][one_half_last]

[/one_half_last][one_half]

[/one_half][one_half_last]

[/one_half_last]

Close Quote Box

Get a Quote

Light Weight Lifters

Operated by a manual hand winch and a steel wire which gives an accurate and fast lift/lowering function. The automatic brake system ensures a safe lowering. 4 castor wheels. Roll attachment options available.

Plattform size (LxB): 480×600 mm

The winch stacker has a very low weight compared to the rated lift capacity, therefore it is very handy and easy-to-use for the operator. It is equipped with adjustable forks for half size pallets, hand winch for lifting and lowering. Large sized rubber rear wheels and small front PU castor wheels, hand controlled brake.

Adjustable fork width, 345-485 mm.

Very flexible and easy-to-operate. Designed to reviel back, neck and shoulders from all types of lifting work from floor level up to head level. Lift/lowering system with electrical motor, chain drive, electronic regulation of lift/lowering incl.soft start/stop, electric overload protection, portable and adjustable hand control unit, maintenance free/sealed battery, automatic built-in battery charger, hand control cable and charger cable. Standard support legs are 105 mm high.

Platform is made of polypropylene (PP).

 

The hydraulic stacker is equipped with both fixed forks and a lose, chromed platform for multipurpose use. You can handle half size pallets and/or use it as a mobile lifting table. Manual stacker with foldable foot pump lever for lifting and manual turning knob for lowering.

Platform size (LxW): 650×580 mm
Inner measure between supporting legs: 370 mm

 

EB-Stackers has a welded and strengthened chassis for heavy loads. 1-stage or 2-stage lifting Masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels.

• MANUAL STACKERS
• LIFTING HEIGHTS 1000-2500 mm

Stackers has a welded and reinforced chassis for heavy loads, 1-stage or 2-stage lifting masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels.

Sealed hydraulic system with protected pump and built-in overload valve. This gives a long and trouble free lifetime. They all have a unique, very easy to pump quick lifting system which lifts 45 mm/ stroke when in quick position. Stackers applies to EN1757.

• EAST TO PUMO
• UNIQUE QUICK-LIFTSYSTEM
• QUICK LIFT 45 mm/STROKE

Semi-electric stacker suited for intensive handling and continuous lifting. Compact design ensures a small turning radius. Fast lifting/lowering speeds.
Easy and smooth steering makes the stacker safe and easy to operate. Service- friendly assembly of hydraulics, electrics and batteries. Large battery, 150Ah/12V, for many working hours per charging.
The perfect choice for high productivity requirements in confined spaces.

Silverstone ES10-series is three compact electric stackers suitable for light material handling in several places such as shops, warehouses, small industries and such. Er- gonomic controls, maintenance free batteries and built-in charger makes them all very easy to operate and for maintenance.

 

ECONOMICAL & COST EFFECTIVE

It is not only the purchase price that is attractive on the new Silverstone ES10-series for light material handling. These stackers are all built with well proven components which are easy to access. This ensures minimal maintenance costs. Forks moves quick up and down, which combined with good walking speed increases productivity.

SAFE

Raising and lowering features are easily accessible on the well-designed steering head. This allows the driver to fully concentrate on the load and stacking movements. The control handle is positioned to provide better visibility for both driving and stack- ing. A long tiller arm with low attachment point provides good safe distance between operator and machine. Also it increases maneuverability.

LIGHT WEIGHTING

Silverstone ES10-series stackers are compact slick and weigh not very much. This allows both driving and stacking in places where it might not otherwise be possible, such as entresols, narrow aisles or some floors that cannot stand the weight from a large stacker.

Compact and manoeuvrable pedestrian stacker with initial lift for handling two pallets simultaneously or driving on uneven surfaces. Mono mast gives good visibility when driving. Excellent stacker for smaller warehouses or stores.

Compact walkie stacker, perfect for order picking, transpor- tation and stacking up to 1600 mm height. The mono mast gives the worker a good sight over the load and forks. An ergonomic steering arm with easily accessible controls fa- cilitates handling. The stacker is equipped with a rubber steering wheel which results in a good grip. The compact design makes the stacker optimal for trucks and in narrow warehouses.

  • INITIAL LIFT
  • FREE LIFT 1550MM
  • COMPACT DESIGN
  • BUILT-IN CHARGER AND MAINTENANCE FREE BATTERIES
  • RUBBER STEERING WHEEL

Silverstone stacker with power steering and propor- tional valve as standard. The stacker is equipped with proven technology including lift motor from Bucher and Zapi steering system. The focus is on comfort and economy where PV valve allows precision when lower- ing the load and where the power steering ensures that you have energy throughout the day.

  • EPS
  • ZAPI STEERING SYSTEM
  • PROPORTIONAL VALVE

Silverstone stacker with power steering and proportional valve as standard. The stacker is equipped with proven technology including lift motor from Bucher and Zapi steering system. The focus is on comfort and economy where PV valve allows precision when lowering the load and where the power steering ensures that you have en- ergy throughout the day.

  • INITIAL LIFT
  • EPS
  • ZAPI STEERING SYSTEM
  • PROPORTIONAL VALVE

With a working height of up to 5 m, the JXO-3060 is an alternative to ladders that are used today in stores, maintenance work or when picking. Only 800mm wide, the JXO-3060 is suitable for driving in narrow spaces and corridors. The load surface can be raised and lowered (electrically), which gives a good visibility while driving as well as an ergonomic working position.

  • COMPACT DESIGN
  • WORKING HEIGHT UP TO 5 METERS
  • LOADING AREA WITH ELECTRIC LIFTING
    AND LOWERING
  • DRIVING SPEED 5KM/
  • BUILD IN CHARGER (230V)
 

PERFECT FOR

  • STORES
  • WAREHOUSE

Silverstone ES10-ESJ-serie ledstaplare is a full-electric stacker for use every day. They are compact, smooth and lightweight.

  • LIFTING HEIGHT 2700 mm/3300 mm
  • COMPACT DESIGN
  • CURTIS STEERING SYSTEM
  • BUILT-IN CHARGER AND MAINTENANCE FREE BATTERIES

ORDER PICKING AT HIGH HEIGHTS

Silverstone CK-05 solves many of the high altitude problems and tasks that you may face when working in industry, warehouse and retail shops. Order picking up to 5 m is no problem.


CK-O5 is simple and easy to manoeuvre thanks to the electric steering and well-designed controls. CK-05 only needs 1,8 meter wide aisle to make a U-turn.


Maintenance work on high levels often means bulky and wobbly ladders in action and yet stability and space is limited. With Silverstone CK-05 you drive around smoothly and easily with space for both materials and tools on board. Do you need to move around the properties while towing one or many carts? No problem, CK-05 solves this task with elegance and safe. CK-05 is equipped with non-marking polyurethane wheels.

Silverstone CK-22 solves many of the upcoming problems and tasks during material handling at high heights. Max. lifting height of the platform is 3000 mm which makes an effective working height of up to 4800 mm possible (depending on height of the operator). In order to ensure optimal working height, maximal fork height can be up to 800 mm. CK-22 is smooth and easy to navigate thanks to electronic power steering and well designed controls. The operator is well protected to enable safe ride.